Riders fly suspended in a harness as gravity carries them down the track. An uplift system returns them to the top.


ZipCoaster: A suspended coaster.
Riders hang below the track. Run it on gravity with riders in a harness, or motorized with riders in a hard seat. Outdoors on towers, or indoors from a ceiling.
- Gravity in a harness
- Motorized in a hard seat
- Automatic cart spacing
- Rider positioning system
- 1,000+ riders a day at Xenses
A suspended coaster.
Riders hang below the track and fly through every turn and drop. The track runs outdoors on towers, or indoors hung from a ceiling.


Two ways to run it.
Run it on gravity with riders in a harness, or motorized with riders in a hard seat, on the same suspended track.
Self-propelled trolleys carry riders in a hard seat, so the ride works on flat ground, low grades and indoors.
Designed around your site.

- Uplift system
- Rider positioning system
- ZipCoaster trolley
- Automatic cart spacing
Built as one system.

Uplift system
- Rope tow cable
- Carries riders to the top
- Several riders on track at once
- Fewer staff needed
Tower system
- Full loop
- Truss with 2 stainless steel rails
- Grades from 3% to 34%
- Towers 15–75 ft tall, 14–24 inches in diameter
Rider positioning system
- Monitors spacing
- Riders every 150 ft (45 m)
- Full-track or zoned
- More throughput, safely
Indoors, outdoors, any ground.
Outdoors on towers, or indoors hung from a ceiling.
The system keeps carts apart along the track, automatically.
Layouts are designed around who your guests are.
Braking that never touches.
When non-ferrous metal moves through a magnetic field, it creates swirling electric currents, called eddy currents, that push back against the motion. We use that force to brake every rider. No pads. No friction. Nothing to wear out.
Self-regulating: faster rider, stronger braking. Patented: US9033115B2 Eddy current speed restriction · US10065507B1 Zipline braking.
The science of safety.
Every Z-Ride is built around one idea: the ride controls the speed, not the rider.
Every rider arrives at the same safe speed, whatever they weigh.
Riders are released only when the line is clear and the braking system is fully reset.
Monitors trolley spacing along the line and keeps riders apart, automatically.
Design, machining, assembly and testing all happen in our own New York facility.
Every part and assembly is load-tested in our New York lab, audited to ASTM F1193.
From first sketch to opening day.
- 01Site surveyFeasibility: terrain, footprint, capacity and budget.
- 02EngineeringLayout, structures and controls, in-house.
- 03Built & testedMade and load-tested in New York.
- 04InstallationInstalled, commissioned and certified.
- 05SupportFor the life of the ride.
Let's build your ZipCoaster.
Tell us about your site and we'll show you what fits, starting with a feasibility study.
Request a feasibility study